FCW V 316L
All-position 316 stainless steel cored wire
Product description
– Stainless steel flux-cored wire for gas-shielded arc welding
– 19% chromium – 12% nickel – 3% molybdenum – low-carbon deposit
– Specially designed for position welding
– Also suitable for flat welding
– Very easy slag removal, excellent radiographic quality
– Very high productivity in upright position
– Can be welded with mixed gas or CO2
Product application instructions
FCW V 316L is suitable for joining stabilized and non-stabilized stainless steels with an alloying element content of 16-21% Cr, 6-13% Ni and up to 3% Mo.
-
the food industry,
-
stainless steel boilermaking,
-
construction of tanks and reservoirs,
-
stainless steel ventilation and air conditioning,
-
maintenance of stainless steel equipment,
-
piping in non-aggressive environments.
Welding positions: EN 287: PA, PB, PC, PD, PE, PF, PG | ASME IX: 1F, 1G, 2F, 2G, 3F, 3G, 4F, 4G, 5G
Wear resistance
Corrosion
Classification
| AWS A 5.22 | EN 12073 |
|---|---|
| E316LT1-4 - E316LT1-1 | T 19 12 3 L P M 1 - T 19 12 3 L P C 1 |
Chemical analysis (%)
| C | Mn | If | Cr | Ni | Mo |
|---|---|---|---|---|---|
| 0.03 | 1.4 | 0.8 | 19.0 | 12.0 | 2.9 |
Mechanical characteristics
| Rm (MPa) | Rp0.2 (MPa) | A5 (%) | KCV |
|---|---|---|---|
| 600 | 490 | 32 | -110°C: 35 J |
Why choose this cored wire?
FCW V 308L is a rutile stainless steel flux-cored wire for welding type 304 / 304L / 1.4301 / 1.4306 austenitic stainless steels.
Designed for MIG/MAG processes, it guarantees excellent weld quality, excellent corrosion resistance and optimum handling, even in difficult positions.
The advantages of the FCW V 308L :
-Excellent weldability: stable arc, even beads and low spatter rate, for clean, fast work.
-Low carbon content (308L): reduces the risk of intergranular corrosion after welding, even without heat treatment.
Easy-to-remove slag and aesthetic cord: clean finish, ideal for visible welds or in the food industry.
-Suitable for all positions: thanks to its rutile coating, the wire is easy to use in upright, flat or angled positions.
-Can be used with conventional gases (Ar + CO₂): no need for special gases, flexible solution in the workshop or on site.
-Good general corrosion resistance: suitable for food, damp or slightly chemical environments.
