FCW 414N-O
Nitrogen bearing open arc wire for cladding of continuous casting rolls
Descripción y aplicaciones
Nitrogen bearing open arc wire for cladding of continuous casting rolls.
Nitrogen-containing 13% Cr martensitic stainless steel weld deposit optimised for corrosion resistance.
The alloy has high hardness and excellent wear and galling resistance.
Ferritic-martensitic stainless steel weld deposit with excellent resistance to thermal fatigue.
Applications
The fully martensitic microstructure provides outstanding tempering resistance, wear resistance, excellent response to thermal fatigue and stress corrosion cracking.
Extensively used as a cladding alloy for rebuilding various steel mill rolls subject to repetitive thermal stresses, corrosion and metal-to-metal wear.
Examples
Typical applications include cladding of continuous caster rolls and certain rolls used in hot rolling applications, steam turbine components, valve seats, valve gates, valve wedges, safety valves etc...
Clasificación
| EN 14700 | DIN 8555 |
|---|---|
| T Fe7 CZ | MF 5 GF 45 CZ |
Análisis químico (%)
| C | Mn | Si | Cr | Ni | Mo | N, Nb, V | Fe |
|---|---|---|---|---|---|---|---|
| 0.10 | 1.00 | 1.00 | 13.00 | 4.00 | 1.00 | + | Bal. |
Propiedades mecánicas
| Hardness - 3 Layer deposit |
|---|
| As welded : 40-44 HRc |
Gas protector
| Current type | DC (+) |
|---|---|
| Shielding | Self shielded |
Parámetros de uso
| Diameter [mm] | Amperage [A] - Range | Voltage [V] – Range | Stick Out [mm] |
|---|---|---|---|
| 1.6 | 150-300 | 26-32 | 15-30 |
| 2.4 | 250-350 | 25-27 | 25-30 |
Posición de soldadura
Flat, half up, half down
Embalaje y diámetros
| Diámetros [mm] | ≤ 2.4 mm | ≥ 2.4 mm | ≥ 2.4 mm |
|---|---|---|---|
| Embalaje | Spool | Coil | Drum |
| Peso [Kg] | 15 kg | 25 kg | 330 kg |
| Descripción | - | - | - |